Digital Pencil Gauging Probes Standard (Gauging) Probes

DP/S – Spring Push
  • 0.5,1,2,5,10,20 and now 30mm measuring ranges
  • Accuracies as low as <0.1 µm
  • Up to 0.01 µm resolution
  • Up to 0.05 µm repeatability
  • Tip force of 0.7N (options available)
  • IP65 sealing (fully sealed options available)

The DP range of spring push probes is the workhorse of the gauging industry. Very high resolution excellent linearity and high data speeds is coupled with outstanding measurement repeatability, Long life bearings and IP65 sealing ensures that the probes maintain their performance for millions of measurements.

DP/P – Pneumatic Push
  • 2, 5, 10, & 20 mm measuring ranges
  • Accuracy as low as < 0.1 µm
  • Up to 0.01 µm resolution
  • Up to 0.05 µm repeatability
  • Tip force of 0.7 N (0.4 bar of pressure)
  • IP65 Sealing
  • Pneumatic gaiter actuation
  • Vacuum retract option available

Pneumatic transducers are ideal for use in automatic gauging applications or for accessing details that would be difcult or impossible to reach with spring push transducers. The standard range of Pneumatic Probes comes with IP65 sealing to ensure a long working life in wet or oily environments.

DJ/P – Jet Push
  • 2,5,10,12,20 mm measuring ranges
  • Same performance as Pneumatic Push
  • Actuation by external piston

Jet ‘J Type' probes are similar to pneumatic except that actuation is by an inbuilt piston. High tip forces are available but as air is vented through a port close to the front of the probe, they have a lower IP rating. These probes will continue to operate even if the gaiter becomes punctured