Spring Push Probe - DP/S

The standard DP range of Spring Push Probes has justifiably become the work horse of the gauging industry. Very high resolution, excellent linearity and high data speed come as standard. Long life precision bearings, and an IP65 rating ensure that probes maintain their performance for millions of cycles.

Blank_1

Quick Links
Technical Data Sheet
CAD Drawing
Manual
Knowledge Base
Related Products
Digital Orbit3 Network

Spring Push Digital Gauging Probe (DP/S) - Specification

Standard
Axial Cable Outlet	DP/2/S	DP/5/S	DP/10/S	DP/12/S	DP/20/S	DP10/2/S
Radial Cable Outlet	DPR/2/S		DPR/10/S		DPR/20/S
Body Diameter	8h6
Measurement Range (mm)	2	5	10	12	20	2
Pre-Travel (mm)	0.15
Over Travel (mm)	0.85					8.85
Accuracy¹ (% of reading)	0.05		0.06	-	0.07	0.05
Repeatability (µm)	<0.15
Tip Force (N) at Centre Travel ± 20%	0.7
Resolution (µm) - User Selectable	<0.01	<0.05		-	<0.01
Data Speed - User Selectable	Up to 3906 readings per second
Environmental Protection	IP 65 (Probe Only)

¹Accuracy 0.1 µm or % reading, whichever greater.

Temperature Ranges (°C)
Storage (Probe + Signal Conditioning)	-20 to +70
Operating (PIE + T-Con)	0 to +60
Operating (Probe Only)	+5 to +80

Materials
Case	Stainless Steel
Probe Tip	Nylon or Tungsten Carbide
Gaiter	High Grade Polymer
Cable	2 m PUR

Digital Probe Interface Electronics
Bandwidth	Up to 460 Hz
Output	Serial RS485 signal level, Solartron Orbit Protocol
Power (VDC)	5 ± 0.25 @ 0.06A (includes power for probe)
IP Rating	IP 43 (IP 65 available on request)
Weight (g)	Probe Interface Electronics				52
	T-Con				36
	T-Con with DIN				46

Untitled Document

Right Angle Adapter

For use with spring push gauging probes. Part Number: 203224

Replacement Gaiters

replacement gaiters

Gaiters can be replaced when damaged. Only pneumatic push probes require gaiter rings.

Part Numbers:

Spring Push		Part Number	Pneumatic Push		Part Number
A6G/1/S	D6P/2/S	205014
AX/1/S	DP/2/S	204851	AX/1/P	DP/2/P	802691
AX/1.5/S		204851
AX/2.5/S	DP/5/S	204894	AX/2.5/P	DP/5/P	802692
AX/5/S	DP/10/S	204860	AX/5/P	DP/10/P	802693
AX5/1/S	DP10/2/S	204860	AX5/1/S	DP10/2/P	802693
	DP/12/S	209562		DP/12/P
AX/10/S	DP/20/S	205906	AX/10/P	DP/20/P	803235

	LE/12/S	209562		LE/12/P	805098
	LE/25/S	205906		LE/25/P	804241

Clamping Collet

For use with all 8 mm clamping shaft sensors. The clamping collet distributes the clamping forces evenly around the shaft. Using the supplied grub screw, the probe can be loosened while holding the collet in place.

Probe Tips

Various probes are available. See Probe tips

Imperial Adapter Sleeves

Adapter Sleeves can be used to increase the body diameter of 8 mm sensors to 9.512 (3/8"). Available in lengths A from 12 to 127 mm.

	Products - Applications - Service Centre - About Us - News - Events	US only
	©Copyright 2012 AMETEK, Inc. All Rights Reserved
	Privacy Policy - Trademarks - Sitemap